Asko washer and dryer sets are becoming more and more popular, they are energy efficient and take up less space in the laundry room. Every now and again these washer and dryers will fail, like in this case. I was able to snap a few photo of this washer main control board, the burn mark on the control indicates a faulty control board.
This washer expelled an error code for a no spin situation, after pulling the top off to make my initial diagnosis I saw that the washers control had a burn mark, you still want to make your normal test as the motor or other component could have caused the control to go bad. Look at this picture and tell me this is not the obvious issue, 3 days later on return visit this washer was back up and running after the control was replaced.
This boar is held down with several plastic tabs using a flat head screw driver and depressing the tabs will release the washers main control board, the wires are all pressed into the appropriate terminals they lift up and out.
Always disconnect the power to your appliance before servicing electrical shock or death can occur during an appliance repair without the proper knowledge. Appliance repair and appliance parts is what I know, if your searching for an appliance repair question drop me a line I would love to try and help out.